manualshive.com logo in svg

Cisco Aironet 1040 Series, Deployment Manual

The Cisco Aironet 1040 Series is a high-performance wireless access point designed to deliver seamless connectivity. For detailed information about its features, specifications, and setup instructions, you can download the free datasheet and user manual from our website. Experience hassle-free downloads at manualshive.com.

Share
Download
background image

CAPWAP Path MTU.................................. 1485
Domain...........................................
Name Server......................................
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ 4404
Primary Cisco Switch IP Address.................. 209.165.200.230
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name....................... 4404
Tertiary Cisco Switch IP Address................. 3.3.3.3
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Global: Disabled, Local: Disabled
AP subMode ...................................... WIPS
Remote AP Debug ................................. Disabled
S/W

Version .................................... 5.1.0.0

Boot

Version ................................... 12.4.10.0

Mini IOS Version ................................ 0.0.0.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Low Power (degraded mode)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
IOS Version...................................... 12.4(10:0)
Reset Button..................................... Enabled
AP Serial Number................................. serial_number
AP Certificate Type.............................. Manufacture Installed
Management Frame Protection Validation........... Enabled (Global MFP Disabled)
AP User Mode..................................... CUSTOMIZED
AP username..................................... maria
AP Dot1x User Mode............................... Not Configured
AP Dot1x username............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 4 days, 06 h 17 m 22 s
AP LWAPP Up Time................................. 4 days, 06 h 15 m 00 s
Join Date and Time............................... Mon Mar 3 06:19:47 2008

Ethernet Port Duplex............................. Auto
Ethernet Port Speed.............................. Auto
AP Link Latency.................................. Enabled

Current Delay................................... 0 ms
Maximum Delay................................... 240 ms
Minimum Delay................................... 0 ms
Last updated (based on AP Up Time).............. 4 days, 06 h 17 m 20 s

Rogue Detection.................................. Enabled
AP TCP MSS Adjust................................ Disabled
Mesh preferred parent............................ 00:24:13:0f:92:00

Co-Channel Interference

In addition to hidden node interference, co-channel interference can also impact performance. Co-channel
interference occurs when adjacent radios on the same channel interfere with the performance of the local mesh
network. This interference takes the form of collisions or excessive deferrals by CSMA. In both cases,
performance of the mesh network is degraded. With appropriate channel management, co-channel interference
on the wireless mesh network can be minimized.

   Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3

70

OL-27593-01  

Site Preparation and Planning

Co-Channel Interference

Summary of Contents for Aironet 1040 Series





















































































































































































































































































Reviews:

No comments

Related manuals for Aironet 1040 Series

D-Link AirPlus DWL-810 Owner'S Manual preview
AirPlus DWL-810
Brand: D-Link Pages: 25
D-Link DSR-500 User Manual preview
DSR-500
Brand: D-Link Pages: 213
Black Box LT2060A Manual preview
LT2060A
Brand: Black Box Pages: 37
Fracarro FRPRO EVO HD Quick Start Manual preview
FRPRO EVO HD
Brand: Fracarro Pages: 12
Multitech MultiConnect SE MTS2EA Specification Sheet preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 2
Omega OMB-DAQBOARD-3000 Series User Manual preview
OMB-DAQBOARD-3000 Series
Brand: Omega Pages: 108
Altera DE2-70 User Manual preview
DE2-70
Brand: Altera Pages: 93
ADTRAN NetVanta 6355 PoE Installation Manual preview
NetVanta 6355 PoE
Brand: ADTRAN Pages: 46
B&B Electronics Parallel Printer Card PIOC User Manual preview
Parallel Printer Card PIOC
Brand: B&B Electronics Pages: 16
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Brand: Lucent Technologies Pages: 20
Renesas R0E530650CFJ30 User Manual preview
R0E530650CFJ30
Brand: Renesas Pages: 4
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Brand: X-Micro Pages: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Brand: Airlink101 Pages: 13
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Brand: ANTAIRA Pages: 19
Alarm NX-208E Installation Manual preview
NX-208E
Brand: Alarm Pages: 5
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Brand: Genexis Pages: 9
Primera Disc Publisher XR Installation Instructions preview
Disc Publisher XR
Brand: Primera Pages: 2
Thermaltake Extreme Spirit Il Instruction preview
Extreme Spirit Il
Brand: Thermaltake Pages: 2

Brands by name

Popular brands

Load more brands