Table 46: Bridging Link Information
Description
Parameter
Date and time that information was compiled.
Information fetched on
Link signal-to-noise ratio (SNR).
Link SNR
Hierarchical link relationship.
Link Type
Signal-to-noise radio for the uplink (dB).
SNR Up
Signal-to-noise radio for the downlink (dB).
SNR Down
Packet error rate for the link.
PER
TX packets to a node while acting as a parent.
Tx Parent Packets
RX packets to a node while acting as a parent.
Rx Parent Packets
Date and time of last hello.
Time of Last Hello
Using Mesh Filters to Modify Map Display of Maps and Mesh Links
In the mesh hierarchical page, you can also define mesh filters to determine which mesh access points display
on the map based on hop values as well as what labels display for mesh links.
Mesh access points are filtered by the number of hops between them and their root access point.
To use mesh filtering, follow these steps:
Step 1
To modify what label and color displays for a mesh link, do the following:
In the Mesh Parent-Child Hierarchical View, select an option from the Link Label drop-down list. Options are None,
Link SNR, and Packet Error Rate.
In the Mesh Parent-Child Hierarchical View, select an option from the Link Color drop-down list to define which
parameter (Link SNR or Packet Error Rate) determines the color of the mesh link on the map.
The color of the link provides a quick reference point of the SNR strength or Packet Error
Rate.
Note
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
248
OL-27593-01
Managing Mesh Access Points with Cisco Prime Infrastructure
Using Mesh Filters to Modify Map Display of Maps and Mesh Links
