![background image](http://html.mh-extra.com/html/cisco/air-wlc4402-12-k9/air-wlc4402-12-k9_installation-and-configuration-manual_64449017.webp)
Installation and Configuration
Collecting Required Tools and Information
7
Cisco 4400 Series Wireless LAN Controllers - Installation and Configuration Guide
78-17157-01
–
VLAN identifier, if the management interface is assigned to a VLAN, or ‘0’ for an untagged
VLAN.
–
Distribution System Physical Port number:
* 4402: 1 - 2 for front panel GigE ports
* 4404: 1 - 4 for front panel GigE ports
–
IP address of the default DHCP server that will supply IP addresses to clients.
–
LWAPP Transport Mode, LAYER2 or LAYER3.
•
Virtual Gateway IP address: one fictitious, unassigned IP address (such as 1.1.1.1) to be used by all
Cisco Wireless LAN Controller Layer 3 Security and Mobility managers.
•
Cisco Wireless LAN Controller Mobility Group (RF Group) Name, if required.
•
802.11 Network Name (SSID) for WLAN 1. This is the default SSID that the access points use when
they join with the Cisco Wireless LAN Controller.
•
Whether or not to allow static IP addresses for clients.
* Yes = more convenient, but lower security (session can be hijacked), clients can supply their own
IP address, better for devices that cannot use DHCP.
* No = less convenient, higher security, clients must use DHCP for an IP address, works well for
Windows XP devices.
•
When you are configuring a RADIUS server, the server IP address, communication port, and Secret.
•
Country Code for this installation. Refer to
Configuring the Cisco Wireless LAN Controller
and
Cisco WLAN Solution Supported Country Codes
in the
Product Guide
.
•
802.11b network enabled or disabled?
•
802.11a network enabled or disabled?
•
802.11g network enabled or disabled?
•
Radio Resource Management (RRM) (Auto-RF) enabled or disabled?
Continue with “
Determining a Physical Location
.”