Installation and Configuration
Installing the Chassis
11
Cisco 4400 Series Wireless LAN Controllers - Installation and Configuration Guide
78-17157-01
The controller is shipped with rack-mounting ears attached, and the desktop/shelf mounting rubber feet
in a separate bag. Mount the controller as follows:
•
When you are mounting the controller on a desktop or shelf, adhere the rubber feet to the bottom of
the chassis, and place the chassis on any secure horizontal surface. Note that you may also remove
the rack mounting ears from the controller, if desired.
•
When you are mounting the controller in an EIA-standard rack, attach the ears to the equipment rack
using the factory-supplied screws.
Caution
The controller weighs 15.2 pounds (6.95 kg). For safety, two or more people must work together to
perform the installation.
You have installed the controller chassis.
Install the SFP modules as described in the
1000BASE-SX, 1000BASE-LX, and 1000BASE-T SFP module
Quick Start Guide
.
If you have purchased an extra power supply module or Enhanced Security Modules refer to the
Cisco
4400 Series Power Supply Quick Start Guide
.
Advarsel
Kun uddannede personer må installere, udskifte komponenter i eller servicere dette
udstyr.