8-5
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Chapter 8 Managing Controller Software and Configurations
Resetting the Controller
Step 3
Follow the instructions in the
“Using the Configuration Wizard” section on page 4-2
to complete the
initial configuration.
Resetting the Controller
You can reset the controller and view the reboot process on the CLI console using one of the following
two methods:
•
Turn the controller off and then turn it back on.
•
On the CLI, enter
reset system
. At the confirmation prompt, enter
y
to save configuration changes
to NVRAM. The controller reboots.
When the controller reboots, the CLI console displays the following reboot information:
•
Initializing the system.
•
Verifying the hardware configuration.
•
Loading microcode into memory.
•
Verifying the Operating System software load.
•
Initializing with its stored configurations.
•
Displaying the login prompt.
