Cisco 8821 Manual Download Page 118

Page: 118 / 202

Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide

118

•

Enter a

Name

for the Wireless LAN Profile containing up to 50 characters.

•

Description

containing up to 63 characters can optionally be configured.

•

Select the desired

User Modifiable

option.

•

Allowed

- The user has the capability to change any Wireless LAN settings (e.g. Enable/Disable, SSID, Frequency

Band, Authentication Method, Username and Password, PSK Passphrase, WEP Key) locally on the endpoint.

•

Disallowed

- The user is unable to change any Wireless LAN settings.

•

Restricted

- The user is only able to change certain Wireless LAN settings (e.g. Username and Password).

Summary of Contents for 8821











































































































































































































Search results

Summary of Contents for 8821

Reviews:

Related manuals for 8821

Brands by name

Popular brands

Cisco 8821, Manual

Search results

Summary of Contents for 8821

Reviews:

Related manuals for 8821

Brands by name

Popular brands