Cisco 8821 Manual Download Page 193

Page: 193 / 202

Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide

193

Restoring Factory Defaults

The configuration of the Cisco Wireless IP Phone 8821 and 8821-EX can be reset to factory defaults by selecting

Applications

> Admin settings > Reset settings > All settings

A confirmation screen will appear where

Reset

must be selected to proceed with the factory data reset.

If the Cisco Wireless IP Phone 8821 or 8821-EX is not able to boot properly, a factory reset can also be initiated via the
following procedure:

•

Turn the phone off by pressing the red button.

•

Press and hold the

key, then power on the phone.

•

Keep the

key held until the LED changes colors.

•

Once the LED changes colors, release the

key.

•

Then press

1 2 3 4 5 6 7 8 9 * 0 #

•

The Cisco Wireless IP Phone 8821 or 8821-EX will then continue the normal boot process and have the factory settings
restored.

Summary of Contents for 8821











































































































































































































Search results

Summary of Contents for 8821

Reviews:

Related manuals for 8821

Brands by name

Popular brands

Cisco 8821, Manual

Search results

Summary of Contents for 8821

Reviews:

Related manuals for 8821

Brands by name

Popular brands