Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
146
•
If option 150 or 66 is not configured to provide the TFTP Server’s IP address via the network’s DHCP scope, then set
Alternate TFTP
to
On
and enter the IP address for the TFTP Server.
•
Select
Save
to save the changes or
Cancel
to dismiss the changes.
•
Ensure to select
Erase
if prompted, when configuring Alternate TFTP.
•
On call power save
defaults to
Enabled
.
•
When
Enabled
, the phone will utilize U-APSD when on call.
•
This parameter does not alter power save when in idle as the phone will always utilize U-APSD when not on call.
•
On call power save
should only be set to
Disabled
if required for troubleshooting purposes.
•
Select
Save
to save the changes or
Cancel
to dismiss the changes.
•
The current network settings can be cleared by selecting
Applications > Admin settings > Reset settings > Network
settings
.
Summary of Contents for 8821
