9
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
78-13937-04
8: Congratulations! You’re Done!
3.
If the web page still does not appear, verify that the PC is configured to automatically receive an IP
address. Follow the instructions in
Step 4
in section “
6: Check the PC Configuration
.” If you need
more information refer to the
Cisco Router Web Setup Troubleshooting Guide
, which is available on
Cisco.com.
4.
If the PC is configured to automatically receive an IP address, but the web page still does not appear,
select
Start/Run
, type
winipcfg
in the Run window, and examine the address in the IP address field.
The address should be in the format 10.10.10.
X,
in which
X
is a number that is 2 or greater; for
example, 10.10.10.2 or 10.10.10.3. If the IP address is not in this format, verify that an Ethernet
adapter name is visible in the Adapter field. If it is not, return to
Step 3
in section “
6: Check the PC
Configuration
,” add TCP to the list of protocols. Then return to section “
7: Configure the Router
with Cisco Router Web Setup
,” and complete the procedure.
Step 4
If you have no special configuration requirements, click the
Router Setup
link on the home page, and
then click
Quick Setup
. (This may appear as
Easy Setup
on some models.) Then, enter the user name
and password provided to you by your Internet service provider, and click
Apply.
Step 5
If you need to configure special features such as Network Address Translation (NAT), click the
appropriate links on the home page, and complete the configuration screens.
Step 6
Click the
Password
link on the home page, and set a password for the router.
Step 7
Click the
Test Connection
link on the home page, and allow the connection to be tested.
Step 8
Select
Start/Run
, and type
winipcfg
in the Open field of the Run window. When the IP Config window
appears, click
Release
, and then click
Renew
to release and renew the PC’s IP address.
Alternatively, open a DOS window, and enter
ipconfig /release
to release the PC’s IP address.Then enter
ipconfig /renew
to renew the IP address of the PC.
Step 9
Open a web browser on the PC, and connect to a website.
8: Congratulations! You’re Done!
If you were able to connect to a website, you have completed the cabling and setup of your router, and
you can continue to use it to access the Internet.
If you need to configure more features, click the CRWS link for the feature you need to configure, and
enter configuration values for the router.
Related Documentation
For more information, refer to the following publications:
•
Cisco 827 and SOHO 77 Routers Hardware Installation Guide
—Provides detailed cabling and
hardware information for the Cisco 827 and SOHO 77 routers.
•
Cisco 827 Routers Software Configuration Guide
—Provides detailed configuration instructions for
the Cisco 827 and SOHO 77 routers.
•
Cisco 828 Router and SOHO 78 Router Hardware Installation Guide
—Provides detailed cabling
and hardware information for the Cisco 828 and SOHO 78 routers.
