4
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
78-13937-04
2: Connect the Router to a Hub (Optional)
See the
“3: Connect a Digital Subscriber Line” section on page 5
to complete the next step.
2: Connect the Router to a Hub (Optional)
If you have PCs connected to a hub, follow the steps shown in
Figure 2 on page 4
to connect the router
to a hub.
Figure 2
shows portions of two router back panels. Refer to the back panel that is similar to the
back panel of the router that you are installing.
Figure 2
Connecting the Router to a Hub
Verify that the TO HUB/TO PC switch on the left side of the back panel has been set to the TO HUB
position (in). If the button is out, press it to set it to the in position. You will know that the position is
correct if the LED for this port on the front of the router lights after the router and the PCs have been
turned on.
1
Set TO HUB/TO PC button for Cisco 827, 827-4V, or
SOHO 77 router.
4
Cisco 1528 Micro Hub 10/100
2
Set TO HUB/TO PC button for Cisco 827H, 828,
SOHO 77H or SOHO 78 router.
5
Connect other end of cable to hub.
3
Connect yellow cable to Ethernet port on router.
6
If applicable, check settings of hub equivalent of router
TO HUB/TO PC button.
ETHERN
ET 10BASE
T
TO HUB
TO PC
4
3
2
1
Model Cisco 828
G.SHDSL
CONSOLE
ETHERNET
TO HUB
TO PC
+5,+12,-12,-24,-71 V
DC
1
CONSOLE
Model Cisco 827-4V
ADSL
PHONE
2
1
4
3
74082
ETHERNET
SPEED
1
5
2
6
3
7
4
8
LED
100BaseTX
SOLID
10BaseT
BLINK
1X
2X
3X
4X
5X
6X
7X
MDI
MDI-X
8X
4. If applicable, check setting
of hub equivalent of router
TO HUB/TO PC button.
3. Connect other
end of cable
to hub.
Cisco 1528 Micro Hub 10/100
2. Connect yellow cable to
ETHERNET port on router.
1. Set TO HUB/TO PC
button.
1. Set TO HUB/TO PC
button.
2. Connect yellow cable to
ETHERNET port on router.
Cisco 827, Cisco 827-4V,
or SOHO 77 router
Cisco 827H, Cisco 828,
SOHO 77H, or
SOHO 78 router
