Cisco 819 series, Installation Manual, Page: 53 / 84

2-9
Cisco 819 Integrated Services Router Hardware Installation Guide
OL-23125-02
Chapter 2 Installing the Router
Installing the Router
Tip
When choosing a location for wall-mounting the router, consider cable limitations and wall structure.
To mount the router on a wall, follow these steps:
Step 1
Remove the screws on the sides of the routers.
Step 2 Attach the standard brackets to the chassis using the three screws provided for each bracket. (See
Figure 2-4 .)
Figure 2-4 Attaching the Standard Brackets
Step 3
Install the router to a wall stud using two number-10 wood screws, round- or pan-head, with number-10
washers or two number-10 washer-head screws. The screws must be long enough to penetrate at least 1.0
inch (25.4 mm) into the supporting wood or metal wall stud. (See
Figure 2-5 .)
Note
The orientation of the Cisco 819 ISR products is critical when wall-mounting. The router must
be oriented as shown in
Figure 2-5 with the left side of the router rotated up (as viewed from the
IO side) to comply with IP41 and safety criteria. No other wall mounting orientation is
supported.
282622