Cisco 819 series, Installation Manual

Page: 35 / 84

1-17
Cisco 819 Integrated Services Router Hardware Installation Guide
OL-23125-02
Chapter 1 Product Overview
Hardware Features
Memory
The Cisco 819HG and Cisco 819G ISRs uses non-upgradable flash memory and main memory. The
onboard flash memory contains the Cisco IOS software image and the boot flash contains the ROMMON
boot code.
Table 1-8 lists the memory requirements for Cisco 819 ISRs.
SIM Green / Yellow (one
green blink followed by
two yellow blinks) SIM in slot 0 is active, SIM in slot 1 is not.
Yellow / Green (one
yellow blink followed
by two green blinks) SIM in slot 1 is active, SIM in slot 0 is not.
Off / Green (two green
blinks and then a pause) No SIM in slot 0, SIM present in slot 1.
Green / Off (Slow single
green blink and then a
pause) SIM present in slot 0, no SIM in slot 1.
Off / Off No SIM present in either slots.
3G/4G Green (one blink and
then a pause) For 1xRTT, EGPRS, or GPRS service.
Green (two blinks and
then a pause) For EVDO, EVDO/1xRTT, or UMTS service.
Green (three blinks and
then a pause) For EVDO/1xRTT RevA, HSPA, or HSUPA/HSDPA
service.
Green (four blinks and
then a pause) For HSPA+ service.
Green (Solid) For 4G/LTE service.
Off No Service.
Table 1-7 4G LTE LED Descriptions (continued)
LED Color Description
Table 1-8 Memory Requirements for Cisco 819 ISRs
Memory Requirements
Cisco 819HG
Cisco 819G
(with 3G)
Cisco 819HGW
Cisco 819HWD
(with WiFi)
Cisco 819HG-4G
Cisco 819G-4G
(with 4G LTE)
256 Compact Flash support in
IDE mode (internal) Yes — —
1 GB Compact Flash support in
IDE mode (internal) — Yes Yes
512 MB DRAM Yes — —
1 GB DRAM — Yes Yes