6
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
OL-10260-02
EMC Class A Notices and Warnings
Statement 157—VCCI Compliance for Class B Equipment
EMC Class A Notices and Warnings
This section includes the following EMC Class A warnings for Cisco 888 and IAD881 models:
•
Class A Notice for FCC
•
CISPR 22 Class A Statement
•
Canadian Class A Statement
•
Statement 191—VCCI Class A Warning for Japan
Class A Notice for FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning
Modification of this equipment without Cisco's authorization may result in this equipment no longer
complying with FCC requirements for Class A digital devices. In that event, your right to use the
equipment may be limited by FCC regulations, and you may be required to correct any interference to
radio or television communications at your own expense.
Warning
This is a Class B product based on the standard of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a
domestic environment, it may cause radio interference. Install and use the equipment according to
the instruction manual.
