8
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
OL-10260-02
Telecommunications
Agency Approvals and Standards
This section lists the following agency approvals and standards for telecommunications:
•
FCC part 68 – TIA-968-A 2002, Addendum 3 2005
•
IC CS-03, issue 9 2004
•
R&TTE Directive 5/1999/EC, CTR3, TBR3
•
AS/ACIF S002, S003, S006, S031, S043, C559
•
IDA TS ISDN, TS ADSL
•
IS 6100
•
225-540-784, 225-540-788
•
ITU I.430, ITU G.991.2, ITU G.992.1
Table 1
lists the Cisco 800 series routers that are not Telecom regulated because they only have Ethernet
ports or are only for Europe.
FCC Part 68 Notice
This equipment complies with Part 68 of the FCC rules and the Technical Requirements for Connection
to the Telephone Network published by ACTA. On the bottom of the this equipment is a label that
contains, among other information, the product identifier US:5B1MFNA0013 or US:5B1DLO1B0144.
If requested, this number must be provided to the telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operation, or procedures that
could affect the operation of this equipment. If this happens, the telephone company will provide
advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
If you have trouble with this equipment, please contact Cisco Systems for repair and warranty
information. If the trouble is causing harm to the telephone network, the telephone company can request
that you remove the equipment from the network until the problem is resolved.
Table 1
Cisco 800 Series Routers That Are Not Telecom Regulated
Models That Have Only Ethernet Ports
Models That are for Europe Only
1
1.
These routers comply with the European requirements of CTR3/TBR3.
Cisco 806
Cisco 836
Cisco 831
Cisco 856
Cisco 851
Cisco 861
Cisco 871
Cisco 881
Cisco 881G
