Cisco 7961, Phone Manual

Page: 64 / 80

56 OL-11526-01
Change the ring pattern
per line 1. Select a device.
2.
Click Line Settings .
3.
If you have more than one directory number (line) assigned to your
phone, verify that the appropriate line is selected or choose a new one.
4.
In the Ring Settings area, choose a setting to tell your phone how to
indicate an incoming call on the selected line.
5.
Click Save .
Note The “idle” ring setting pertains if you receive an incoming call when the
phone is idle. The “consecutive” ring setting pertains if you receive an
incoming call when the phone is active.
Change or create a line
text label that appears
on your phone screen
1.
Select a device.
2.
Click Line Settings .
3.
If you have more than one directory number (line) assigned to your
phone, verify that the appropriate line is selected or choose a new one.
4.
In the Line Text Label area, enter a text label.
5. Click Save .
Note Your phone uses the ASCII Label field if the phone does not support
double-byte character sets.
If you want to... Then do this after you log in...