Cisco 7961 Phone Manual Download Page 11 | Manualshive

Page: 11 / 80

background image

Getting Started

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.1 (SCCP and SIP)

3

Warning

To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to
telephone network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN
ports contain TNV circuits. Some LAN and WAN ports use RJ-45 connectors. Use caution
when connecting cables.

Caution

Inline power circuits provide current through the communication cable. Use the Cisco
provided cable or a minimum 24 AWG communication cable.

Using an External Power Supply

The following warnings apply when you use the external power supply with the
Cisco Unified IP Phone:

Warning

This product relies on the building's installation for short-circuit (over current)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC,
10A international) is used on the phase conductors (all current-carrying conductors).

Warning

The device is designed to work with TN power systems.

Warning

The plug-socket combination must be accessible at all times because it serves as the
main disconnecting device.

Warning

The power supply must be placed indoors.

Caution

Only use the Cisco specified power supply with this product.

Power Outage

Your accessibility to emergency service through the phone is dependent on the phone being powered.
If there is an interruption in the power supply, Service and Emergency Calling Service dialing will not
function until power is restored. In the case of a power failure or disruption, you may need to reset or
reconfigure equipment before using the Service or Emergency Calling Service dialing.

«
...
9
10
11
12
13
...
»

Summary of Contents for 7961

















































































Reviews:

No comments

Related manuals for 7961

Brand: Toa Pages: 1

Brand: Turtle Beach Pages: 5

Brand: Sensear Pages: 22

Brand: Canyon Pages: 10

Brand: JVC Pages: 2

Brand: JVC Pages: 2

Brand: JVC Pages: 2

Brand: JVC Pages: 2

Brand: Advanced Wireless Communications Pages: 10

Evolve 75 UC Stereo

Brand: Jabra Pages: 13

Brand: EKSA Pages: 14

Brand: Genesis Pages: 12

Brand: Genesis Pages: 12

Brand: Jabra Pages: 2

Brand: Vizio Pages: 1

HEADSET SETUPS FOR CISCO PHONES

Brand: Plantronics Pages: 5

Brand: Plantronics Pages: 1

Brand: Plantronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands