21
High priority (flash) call
Highest priority (flash override) or Executive Override call
Higher priority calls are displayed at the top of your call list. If you do not see an MLPP icon, the priority level of the call is
normal (routine).
Note
Contact your system administrator for a list of corresponding precedence numbers for calls.
To Make a Priority (Precedence) Call:
Enter the MLPP access number (provided by your system administrator) followed by the Precedence level (0-4) and the phone
number.
Note
If you enter an invalid MLPP access number, a verbal announcement alerts you of the error.
To answer an MLPP Call:
End an active call (if necessary) and answer the MLPP call.
If the active call has lower precedence than the incoming call then the active call is preempted.
Tips
–
When you are receiving a priority (precedence) call, an MLPP icon on your phone screen indicates the priority level of
the call.
–
When you make or receive an MLPP-enabled call, you hear special ring tones and call-waiting tones different from the
standard tones.
–
When you or the other party are receiving a call that must preempt the current call, disconnect immediately to allow
the higher priority call to ring through.
–
When you have more than 1 active call, the call with the lowest precedence is preempted. Similarly, for outgoing calls,
the call with lower precedence is preempted first.
Adjust the Volume for the Current Call
To adjust the handset, speakerphone, or headset volume for the current call:
1.
During a call, press the
Up
or
Down
Volume
button.
2.
Press
Save
to apply the new volume level to future calls.
Adjust the Ring Volume
To adjust the ring volume, press the
Up
or
Down
Volume button while the handset is in its cradle.
Select the Ring Type
To change the ring type:
1.
Press the
Settings
button.
2.
Press
2
for Ring Type, or use the
Navigation
button to select Ring Type and press
Select
.
3.
Use the
Navigation
button to select the ring type. Press the
Play
soft key to hear samples.
4.
Highlight the ring you want, and then press
Select
.
5.
Use one of the following options:
•
Press the
Ok
to select your setting, which returns you to the previous menu,
Summary of Contents for 7905G/7912G
Page 24: ...24 ...