6-7
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
Chapter 6 Monitoring the Cisco Unified IP Phone Remotely
Network Statistics
Network Statistics
The following network statistics hyperlinks on a phone’s web page provide information about network
traffic on the phone. To display a network statistics area, access the web page for the phone as described
in the
“Accessing the Web Page for a Phone” section on page 6-1
.
•
Ethernet Information—Displays information about Ethernet traffic.
Table 6-3
describes the items in
this area.
CDP: PC Port
(Cisco Unified IP Phone
6911 only)
Indicates whether CDP is supported on the PC port (default is enabled).
Enable CDP on the PC port when Cisco VT Advantage/Unified Video Advantage (CVTA) is
connected to the PC port. CVTA does not work without CDP interaction with the phone.
When CDP is disabled in Cisco Unified Communications Manager, a warning displays to
indicate that disabling CDP on the PC port prevents CVTA from working.
The current PC and switch port CDP values are shown on the Settings menu.
CDP: SW Port
Indicates whether CDP is supported on the switch port (default is enabled).
Enable CDP on the switch port for VLAN assignment for the phone, power negotiation, QoS
management, and 802.1x security.
Enable CDP on the switch port when the phone is connected to a Cisco switch.
When CDP is disabled in Cisco Unified Communications Manager, a warning is presented,
indicating that CDP should be disabled on the switch port only if the phone is connected to a
non-Cisco switch.
The current PC and switch port CDP values are shown on the Settings menu.
SSH Access Enabled
Indicates whether the phone accepts or blocks the SSH connections.
EnergyWise Level
Indicates the EnergyWise Level.
EnergyWise Domain
The EnergyWise domain that the phone is in.
FIPS Mode Enabled
Indicates whether the FIPS Mode parameter is enabled.
IP Addressing Mode
Displays the IP addressing mode that is available on the phone.
IP Preference Mode Control
Indicates the IP address version that the phone uses during signaling with Cisco Unified
Communications Manager when both IPv4 and IPv6 are both available on the phone.
IPv6 Auto Configuration
Displays whether the auto configuration is enabled or disabled on the phone.
IPv6 CAPF Server
Common Name (from the Cisco Unified Communications Manager Certificate) of the CAPF
used by the phone.
DHCPv6
Dynamic Host Configuration Protocol (DHCP) automatically assigns IPv6 address to devices
when you connect them to the network. Cisco Unified IP Phones enable DHCP by default.
IPv6 Default Router 1
Default router used by the phone (Default Router 1).
IPv6 Address
IPv6 address of the phone. The IPv6 address is a 128 bit address.
IPv6 Prefix Length
Subnet prefix length that is used by the phone. The subnet prefix length is a decimal value
from 1-128, that specifies the portion of the IPv6 address that comprises the subnet.
IPv6 TFTP Server
Indicates whether the phone is using the IPv6 Alternate TFTP server.
Table 6-2
Network Configuration Area Items (continued)
Item
Description
