Cisco 6901 Standard Administration Manual Download Page 32

Page: 32 / 156

1-20

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24582-01

Chapter 1 An Overview of the Cisco Unified IP Phone

Overview of Configuring and Installing Cisco Unified IP Phones

Add user information by configuring required fields.
Required fields are indicated by an asterisk (*); for
example, User ID and last name.

Note

Assign a password (for User Options web
pages) and PIN (for accessing the Network
Menu via the Interactive Voice Response
[IVR]).

Adds user information to the global directory for
Cisco Unified Communications Manager (CM).

For more information, go to the

End User Configuration

chapter

in the

Cisco Unified Communications Manager

Administration Guide

See the

“Adding Users to Cisco Unified

Communications Manager” section on page 5-9

Note

If you want to add both the phone and user to the
Cisco Unified Communications Manager
database at the same time, go to the

User/Phone

Add Configurations

chapter

in the

Cisco Unified

Communications Manager Administration
Guide

Associate a user to a user group.

Assigns users a common list of roles and permissions
that apply to all users in a user group. Administrators
can manage user groups, roles, and permissions to
control the level of access (and, therefore, the level of
security) for system users.

Note

For end users to access Cisco Unified CM
User Options, you must add users to the
standard Cisco CCM End Users group.

Refer to the following sections in the

Cisco Unified

Communications Manager Administration Guide

•

“

End User Configuration Settings

” section in the

“

End User Configuration

” chapter.

•

“

Adding Users to a User Group

” section in the “

User

Group Configuration

” chapter.

Associate a user with a phone (optional).

Provides users with control over their phone such a
forwarding calls or adding speed-dial numbers or
services.

Note

Some phones, such as those in conference
rooms, do not have an associated user.

For more information, go to the “

Associating Devices to

an End User

” section in the

End User Configuration

chapter

in the

Cisco Unified Communications Manager

Administration Guide

Table 1-8

Checklist for Configuring the Cisco Unified IP Phone 6901 and 6911 in Cisco Unified Communications
Manager (continued)

Task

Purpose

For More Information

Summary of Contents for 6901 Standard





























































































































































Search results

Summary of Contents for 6901 Standard

Reviews:

Related manuals for 6901 Standard

Brands by name

Popular brands

Cisco 6901 Standard, Administration Manual

Search results

Summary of Contents for 6901 Standard

Reviews:

Related manuals for 6901 Standard

Brands by name

Popular brands