Cisco 6901 Standard Administration Manual Download Page 38 | Manualshive

Page: 38 / 156

background image

2-2

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24582-01

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Understanding Interactions with Other Cisco Unified IP Telephony Products

•

Understanding How the Cisco Unified IP Phone Interacts with Cisco Unified Communications
Manager Express, page 2-3

Understanding How the Cisco Unified IP Phone Interacts with Cisco Unified
Communications Manager

Cisco Unified Communications Manager is an open and industry-standard call processing system.
Cisco Unified Communications Manager software sets up and tears down calls between phones,
integrating traditional PBX functionality with the corporate IP network. Cisco Unified Communications
Manager manages the components of the IP telephony system—the phones, the access gateways, and the
resources necessary for features such as call conferencing and route planning. Cisco Unified
Communications Manager also provides:

•

Firmware for phones

•

Configuration file via TFTP service

•

Phone registration

•

Call preservation, so that a media session continues if signaling is lost between the primary
Communications Manager and a phone

For information about configuring Cisco Unified Communications Manager to work with the IP devices
described in this chapter, go to the

Cisco Unified IP Phone Configuration

chapter in the

Cisco Communications Manager Administration Guide

.

For an overview of security functionality for the Cisco Unified IP Phone, see the

“Understanding

Security Features for Cisco Unified IP Phones” section on page 1-10

.

Note

If the Cisco Unified IP Phone model that you want to configure does not appear in the Phone Type
drop-down list in Cisco Unified Communications Manager, go to the following URL and install the latest
support patch for your version of Cisco Unified Communications Manager:

http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240

For more information, refer to “Software Upgrades” chapter in the

Cisco Unified Communications

Operating System Administration Guide

.

Related Topic

•

Telephony Features Available for the Cisco Unified IP Phone, page 5-1

Understanding How the Cisco Unified IP Phone 6911 Interacts with the VLAN

The Cisco Unified IP Phone 6911 has an internal Ethernet switch, enabling forwarding of packets to the
phone, and to the access port and the network port on the back of the phone.

Note

Cisco Unified IP Phone 6901 does not have a PC port.

If a computer is connected to the access port, the computer and the phone share the same physical link
to the switch and share the same port on the switch. This shared physical link has the following
implications for the VLAN configuration on the network:

«
...
36
37
38
39
40
...
»

Summary of Contents for 6901 Standard





























































































































































Reviews:

No comments

Related manuals for 6901 Standard

Brand: Yealink Pages: 8

Brand: T-Mobile Pages: 2

Brand: Samsung Pages: 212

Brand: Unihertz Pages: 97

Brand: T-Mobile Pages: 4

Brand: T-Mobile Pages: 158

Brand: T-Mobile Pages: 212

Brand: BENQ-SIEMENS Pages: 132

Brand: i-mobile Pages: 72

Brand: Rath Pages: 9

Brand: Hammer Pages: 11

Aastra 480i SIP

Brand: ADTRAN Pages: 29

Brand: Sagem Pages: 92

Brand: Tadiran Telecom Pages: 222

Brand: Fortinet Pages: 28

Brand: Videocon Pages: 28

Brand: Allview Pages: 30

Brand: Sagem Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands