3-26
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 3 Configuring and Managing the IP Camera
Network Setup Windows
IP Filter Settings Window
The IP Filter Settings window provides options for controlling access to the IP camera by designating
up to 10 IP addresses or address ranges that are allowed or denied access to the IP camera.
To display the IP Filtering window, access the configuration windows as described in the
“Performing
the Initial Setup of the IP Camera” section on page 2-5
, click
Network Setup
, then click
IP Filtering
.
Root CA Certificate
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click
Browse
to find this location.
After you enter this information, click
Upload
to upload the certificate to the
IP camera.
EAP-PEAP Configuration Options
Note
These options appear if you select the protocol type
EAP-PEAP
.
Inner EAP Protocol
Choose an inner authentication method for EAP-PEAP.
User Name
Enter the user name that the IP camera uses to access the RADIUS server.
Password
Enter the password that the IP camera uses to access the RADIUS server.
Anonymous ID
Optional
. Anonymous identifier to be used instead of a user name for
logging in to the RADIUS server.
Validate Server
Certificate
Check this check box if you want the identity of the RADIUS server to be
validated.
Root CA Certificate
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click
Browse
to find this location.
After you enter this information, click
Upload
to upload the certificate to the
IP camera.
EAP-FAST Configuration Options
Note
These options appear if you select the protocol type
EAP-FAST
.
Inner EAP Protocol
Choose an inner authentication method for EAP-FAST.
User Name
Enter the user name that the IP camera uses to access the RADIUS server.
Password
Enter the password that the IP camera uses to access the RADIUS server.
Anonymous ID
Optional
. Anonymous identifier to be used instead of a user name for
logging in to the RADIUS server.
Allow Automatic PAC
Provisioning
Check this check box if you want to allow authentication servers to establish
a secure connection with the IP camera so that they can provide the IP
camera with new Protected Access Credentials (PACs).
PAC file
Path and folder where the PAC file is stored. You can click
Browse
to find
this location.
After you enter this information, click
Upload
to upload the certificate to the
IP camera.
Table 3-14
802.1x Settings Window Options (continued)
Option
Description
