2-16
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
OL-1957-03
Chapter 2
Using the Setup Command Facility
Configuring Interface Parameters
•
If you plan to connect another ISDN device (such as an ISDN telephone) to the ISDN BRI line
through the router, ask for point-to-multipoint service (subaddressing is required) and a
voice-and-data line.
ISDN BRI Provisioning by Switch Type
ISDN BRI provisioning refers to the types of services provided by the ISDN BRI line. Although
provisioning is performed by your ISDN BRI service provider, you must tell the provider what you want.
Table 2-2
lists the provisioning you should order for the router based on switch type.
Table 2-2
ISDN Provisioning by Switch Type
Switch Type
Provisioning
5ESS Custom BRI
For data only
2 B channels for data
Point to point
Terminal type = E
1 directory number (DN) assigned by service provider
MTERM = 1
Request delivery of calling line ID on Centrex lines
Set speed for ISDN calls to 56 kbps outside local exchange
5ESS Custom BRI
For voice and data
(Use these values only if you have an ISDN telephone connected.)
2 B channels for voice or data
MultiPoint
Terminal type = D
2 directory numbers assigned by service provider
2 service profile identifiers (SPIDs) required, assigned by service provider
MTERM = 2
Number of call appearances = 1
Display = No
Ringing/idle call appearances = idle
Autohold= no
Onetouch = no
Request delivery of calling line ID on Centrex lines
Set speed for ISDN calls to 56 kbps outside local exchange
Directory number 1 can hunt to directory number 2