CISCO S3000/S5000 SERIES MEDIA PROCESSORS
43
Main Menu
Submenus
ASF Output
Main Port
Main Max Clients
PIP Port
PIP Max Clients
Power Reboot Confirm
Reboot
Shutdown Confirm
Shutdown
Start (encoding)
Stop (encoding)
Status
Changing values via the Front Panel Controls
For the following menu items simply press the
Enter
key to take action.
Start
encoding
Stop
encoding
Load Profile 1 (Default Profile)
Load Profile 2
Load Profile 3
Save Profile 1 (Default Profile)
Save Profile 2
Save Profile 3
For some menu items, there is a list of valid values. For example, PIP Enable can be
set On or Off. Use the
up
and
down
keys to scroll through this list. The last setting
viewed is immediately applied.
For other menu items, pressing the
Enter
key will place the front panel into an
Edit
mode to allow the user to set values explicitly. Once
Enter
is pressed, a cursor will
appear to enable editing of the item. Use the
left
and
right
keys to move the cursor.
Use the
up
and
down
keys to change the value at the cursor. When finished, press
Enter
to apply the new setting. If the setting is determined to be invalid, the previous
value will be restored. For IP addresses, you will be asked whether to apply changes
