CISCO SYSTEMS, INC.
4
Analog Video and Audio
For analog sources, connect the provided breakout adapter cable for the analog video
and audio input signals to the Analog In 60-pin connector. For reference, consult the
following diagram of the breakout cable connections:
Figure 1: Cisco S3000/S5000 Series Media Processor Analog Input Breakout Adapter Cable
Use the following table to determine the proper connectors to use for analog
Component, Composite, and S-Video sources.
Color Label Component Composite S-Video
green Y/CVBS Y
CVBS
blue Pb/Y Pb
Y
red Pr/C Pr
C
Cisco Media Processor utilizes locking BNC connectors for S-Video. If your source S-
Video is not BNC based, you will need to use a BNC S-Video adapter such as an S-
Video Male to Dual BNC Female Adapter 75 Ohm Coaxial.