CISCO S3000/S5000 SERIES MEDIA PROCESSORS
39
NOTE:
Configuration of Ethernet ports is only allowed if the media is
connected.
Starting/Stopping Encodes
To start an encode, click the Start link in the top right corner of any Cisco Media
Processor Web interface page. Once the encode starts, the encode status will change
to Running and the Start link will be replaced by a Stop link, which can be clicked to
stop the encode.
While an encode is running, the Web interface may be used to view settings, but the
Apply
and
Reload
buttons will be grayed, except for those on the System Information
page and the Logging page. To make changes to other settings, stop the encode, then
apply changes and restart.
Session Timeouts
After a period of inactivity on the Web pages, your login session will time out and you
will be redirected to the login page. The default value is 15 minutes.
The web timeout is stored in the following registry setting:
HKEY_LOCAL_MACHINE\SOFTWARE\Inlet\Spinnaker\SessionTimeout.
