7-5
Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
OL-6426-02
Chapter 7 Configuring VPNs Using an IPSec Tunnel and Generic Routing Encapsulation
Configure a VPN
Enable Policy Lookup
Perform these steps to enable policy lookup through AAA, beginning in global configuration mode:
Step 4
domain
name
Example:
Router(config-isakmp-group)#
domain
company.com
Router(config-isakmp-group)#
Specifies group domain membership.
Step 5
exit
Example:
Router(config-isakmp-group)#
exit
Router(config)#
Exits IKE group policy configuration mode, and
enters global configuration mode.
Step 6
ip local pool
{
default
|
poolname
}
[
low-ip-address
[
high-ip-address
]]
Example:
Router(config)#
ip local pool dynpool
30.30.30.20 30.30.30.30
Router(config)#
Specifies a local address pool for the group.
For details about this command and additional
parameters that can be set, see the
Cisco IOS Dial
Technologies Command Reference
.
Command or Action
Purpose
Command or Action
Purpose
Step 1
aaa new-model
Example:
Router(config)#
aaa new-model
Router(config)#
Enables the AAA access control model.
Step 2
aaa authentication login
{
default
|
list-name
}
method1
[
method2...
]
Example:
Router(config)#
aaa authentication login
rtr-remote local
Router(config)#
Specifies AAA authentication of selected users at
login, and specifies the method used.
This example uses a local authentication database.
You could also use a RADIUS server for this. See
the
Cisco IOS Security Configuration Guide
and
the
Cisco IOS Security Command Reference
for
details.
Summary of Contents for 1801
