Cisco 1801, Configuration Manual

Page: 139 / 198

13-13
Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
OL-6426-02
Chapter 13 Configuring Dial Backup and Remote Management
Configuring Dial Backup and Remote Management Through a V.92 Modem
dialer string 384020
dialer-group 1
peer default ip address pool isdn
!
ip local pool isdn 192.168.2.1
ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.2.1
ip route 40.0.0.0 255.0.0.0 30.1.1.1
!
dialer-list 1 protocol ip permit
!
Configuring Dial Backup and Remote Management Through a
V.92 Modem
Perform the following tasks to configure dial backup and remote management through the V.92 modem
on your Cisco 1811 router:
•
Asynchronous Interface Configuration
• Line Configuration
Asynchronous Interface Configuration
Perform these steps to configure the V.92 modem for use as a backup interface, beginning in global
configuration mode:
Command Purpose
Step 1 interface type number
Example:
Router(config)# interface async 1
Router(config-if)#
Enters interface configuration mode for the
asynchronous serial interface. Enter the number of
the interface you want to configure.
Step 2 ip unnumbered type number
Example:
Router(config-if)#
ip unnumbered
FastEthernet 2
Router(config-if)#
Conserves IP addresses by configuring the
asynchronous interface as unnumbered, and
assigns the IP address of the interface type that
you want to leverage.
Step 3 encapsulation encapsulation-type
Example:
Router(config-if)#
encapsulation ppp
Router(config-if)#
Sets the encapsulation type to PPP for the
interface.