3-48
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Chapter 3 Installing the 1552 Series Access Points in Hazardous Locations
Mounting on a Wall or a Pole
The mounting bracket can be used as a template to mark the screw hole locations, or you can refer to the
following diagram:
Note
BCD is Bolt Circle Diameter.
To mount the access point on a vertical wall, follow these instructions:
Step 1
Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. See
for the mounting bracket screw hole locations. You can optionally use the individual
mounting holes or the mounting slots.
1
8.49 inches (21.56 cm)
2
13.17 inches (33.45 cm)
3
4.09 inches (10.38 cm)
4
5.41 inches (13.74 cm)
5
2.88 inches (7.32 cm)
6
0.335 inches (0.851 cm)
7
0.350 inches (0.889 cm)
