2-41
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Chapter 2 Before You Begin
Installation Guidelines
Becoming Familiar with Access Point Installation Components
The access point is designed to be installed in an outdoor environment, such as the exterior roof overhang
of a tall building or a streetlight pole. Carefully review the following figures to become familiar with the
system components, connectors, indicators, cables, system interconnection, and grounding:
•
Components in a typical access point installation (see
)
•
)
Note
The illustrations in this document show all available connections for the access point. Unused
connections must be capped with a connector plug to ensure the watertight integrity of the access point.
Liquid-tight adapters are provided for connector openings, which can be installed before or after
deploying the access point.
Caution
The liquid-tight adapter(s) supplied in the kit are IP68/69 certified with .200 to .350 diameter cables but
not ATEX certified or hazardous locations compliant. The installer must use cable glands appropriate to
the installation.
Figure 2-1
Components in a Typical Access Point Installation
281938
1
10
8
9
7
6
5
4
3
2
