Appendix A Technical Specifications
Router Specifications
A-4
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Input current rating
60A maximum @ 40.5 VDC
Source DC service requirement
Sufficient to supply the rated input current. Local codes apply.
1.
For each PEM.
Caution
To ensure that the chassis configuration complies with the required power
budgets, use the on-line power calculator. Failure to properly verify the
configuration may result in an unpredictable state if one of the power units fails.
Contact your local sales representative for assistance.
Table A-4
Environmental Specifications
Description
Value
Temperature
Operating: 32° to 104°F (0° to 40°C)
Nonoperating: –4° to 149°F (–20° to 65°C)
Humidity
Operating: 10 to 90% noncondensing
Nonoperating: 5 to 95% noncondensing
Altitude
Operating: 0 to 10,000 ft (0 to 3,000 m)
Nonoperating: 0 to 15,000 ft (0 to 4,570 m)
Heat dissipation
11,602 BTU/hr maximum (original series)
16,378 BTU/hr maximum (enhanced series)
Acoustic noise
70 dBa maximum
Shock
Operating (halfsine): 21 in./sec (0.53 m/sec)
Nonoperating (trapezoidal pulse): 20G
1
, 52 in./sec (1.32 m/sec)
1.
G is a value of acceleration, where 1G equals 32.17 ft/sec
2
(9.81 m/sec
2
).
Vibration
Operating: 0.35 Grms
2
from 3 to 500 Hz
Nonoperating: 1.0 Grms from 3 to 500 Hz
2.
Grms is the root mean square value of acceleration.
Table A-3
DC Electrical Specifications
Description
Value