Chapter 3 Installing the Router
Rack-Mounting the Router Chassis
3-14
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Repeat these steps to attach a bracket in the same position on the other side of the
platform.
Step 4
Align the platform between the rack posts and set it in position so that the sides
of the positioning brackets with the oblong holes are flush against the
rack-mounting flanges.
Step 5
Secure the platform to the rack:
a.
Locate an open screw hole through the oblong hole in the bracket, then insert
a screw and use your fingers to loosely tighten it (see blow-out in
Figure 3-6
).
b.
Repeat step a. for the other side of the platform.
c.
Verify that the platform is level and seated squarely against the rack, then
tighten all four screws.
Figure 3-6
The Chassis Rack-Mounting Platform
28447