A-3
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Appendix A Technical Specifications
Router Specifications
Caution
To ensure that the chassis configuration complies with the required power
budgets, use the on-line power calculator. Failure to properly verify the
configuration may result in an unpredictable state if one of the power units fails.
Contact your local sales representative for assistance.
Table A-2
AC Electrical Specifications
Description
Value
Power
•
Standard subsystem (3 power
supplies—original series)
•
Optional subsystem (4 power
supplies—original series)
•
Standard subsystem (3 power
supplies—enhanced series)
•
Optional subsystem (4 power
supplies—enhanced series)
4000 W maximum (for 3 AC-input power supplies—N+1
redundancy)
4000 W maximum (for 4 AC-input power supplies—N+2
redundancy)
4800 W maximum (for 3 AC-input power supplies—N+1
redundancy)
4800 W maximum (for 4 AC-input power supplies—N+2
redundancy)
Rated input voltage
1
1.
For each power supply module (three in the standard shelf; four in the optional shelf).
200 to 240 VAC nominal (range: 180 to 264 VAC)
Rated input line frequency
1
50 to 60 Hz nominal (range: 47 to 63 Hz)
Input current rating
1
13 A maximum @ 200 to 240 VRMS
Source AC service requirement
1
20 A North America; 16 A international
Table A-3
DC Electrical Specifications
Description
Value
Power
4800 W maximum
Rated input voltage
1
–48 VDC nominal in North America
–60 VDC nominal in the European Community
(range: –40.5 to –72 VDC (–75 VDC FOR 5mS))
–40 VDC to –72 VDC steady-state input voltage