2-34
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Chapter 2 Overview: Cisco 12000 Series Router Shared Port Adapters
1-Port OC-192c/STM-64 POS SPA Overview
The 1-Port OC-192c/STM-64 POS/RPR SPA uses a single,10-Gbps fixed optical receptacle allowing a
connection to single-mode optical fiber. For more information on the optical fiber cables used with this
SPA, see the
“1-Port OC-192c/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and
Cables” section on page 2-36
.
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR SPA:
•
1-Port OC-192c/STM-64 POS/RPR SPA LEDs, page 2-34
•
1-Port OC-192c/STM-64 POS/RPR SPA Interface Specifications, page 2-35
•
1-Port OC-192c/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and Cables,
page 2-36
1-Port OC-192c/STM-64 POS/RPR SPA LEDs
The 1-Port OC-192c/STM-64 POS/RPR SPA has six LEDs, as shown in
Figure 2-21
.
Figure 2-21 1-Port OC-192c/STM-64 POS/RPR SPA Faceplate
Note
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. In
Cisco IOS Release 12.0(31)S, RPR/SRP mode is not supported.
The 1-Port OC-192c/STM-64 POS/RPR SPA LEDs are described in
Table 2-27
.
1
WRAP LED
4
CARRIER LED
2
PASSTHRU LED
5
ACTIVE LED
3
MATESYNC LED
6
STATUS LED
SPA-OC192POS LR
ST
ATUS
MA
TESYNC
PASSTHRU
WRAP
ACTIVE
CARRIER
0
1
2
3
4
6
5
129138
TX
RX
Table 2-27 1-Port OC-192c/STM-64 POS/RPR SPA LEDs
LED Label
Color
State
Meaning
WRAP
Off
Off
Port is not in wrap mode.
Green
On
Port is in wrap mode somewhere on the ring.
Amber
On
Port is in wrap mode locally.
PASSTHRU
Off
Off
Port is not in pass-thru mode.
Amber
On
Port is in pass-thru mode.
