Cisco 10000 Series Configuration Manual Download Page 97

Page: 97 / 854

1-53

Cisco 10000 Series Router Quality of Service Configuration Guide

OL-7433-09

Chapter 1 Quality of Service Overview

QoS Features, Commands, and Changes

pvc-bundle Command

Cisco IOS Release:

Release 12.0(26)S

Description:

The

pvc-bundle

command was introduced on the PRE1 to add a permanent virtual circuit

(PVC) to a bundle as a member of the bundle and enter bundle-vc configuration mode in order to
configure that PVC bundle member,

pvc Command (Frame Relay VC-bundle)

Cisco IOS Release:

Release 12.0(26)S

Description:

The

pvc

command was introduced on the PRE1 to create a permanent virtual circuit (PVC)

that is a Frame Relay PVC bundle member, and to enter Frame Relay VC-bundle-member configuration
mode.

PVC Bundles Over ATM and Frame Relay Feature

Cisco IOS Release:

Release 12.0(26)S

Description:

The

PVC bundles over ATM and Frame Relay feature was introduced on the PRE1 to

combine PVCs into one logical interface. This feature provides IP precedence and DSCP-based PVC
selection.

ATM PVC Bundle Enhancement—MPLS EXP-Based PVC Selection Feature

Cisco IOS Release:

Release 12.0(26)S

Description:

The ATM PVC Bundle Enhancement—MPLS EXP-Based PVC Selection feature was

introduced on the PRE1 to provide ATM PVC selection based on the MPLS EXP level of a packet.

Frame Relay PVC Bundles with QoS Support for IP and MPLS Feature

Cisco IOS Release:

Release 12.0(26)S

Description:

The Frame Relay PVC Bundles with QoS Support for IP and MPLS feature was introduced

on the PRE1 to provide Frame Relay PVC selection based on the precedence, DSCP, or MPLS EXP level
of a packet.

QoS Policy Maps

Documentation Reference:

Chapter 3, “Configuring QoS Policy Actions and Rules”

•

policy-map Command, page 1-54

•

qos match statistics Command, page 1-54

•

Policy Maps Feature, page 1-54

•

Policy Map Scaling Phase 2, page 1-54

Summary of Contents for 10000 Series























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 10000 Series

Reviews:

Brands by name

Popular brands

Cisco 10000 Series, Configuration Manual

Search results

Summary of Contents for 10000 Series

Reviews:

Brands by name

Popular brands