manualshive.com logo in svg

Cisco 10000 Series, Configuration Manual

Share
Download
Cisco 10000 Series Configuration Manual Download Page 701

19-9

Cisco 10000 Series Router Quality of Service Configuration Guide

OL-7433-09

Chapter 19      Configuring Quality of Service for PVC Bundles

ATM PVC Selection

mpls experimental Command

To configure Multiprotocol Label Switching (MPLS) experimental (EXP) levels for a virtual circuit 
(VC) class that can be assigned to a PVC bundle and thus applied to all PVC members of that bundle, 
use the 

mpls experimental

 command in vc-class configuration mode. To remove the MPLS EXP levels 

from the VC class, use the 

no

 form of the command.

To configure the MPLS EXP levels for a PVC member of a bundle, use the 

mpls experimental

 command 

in bundle-vc configuration mode. To remove the MPLS EXP levels from the PVC, use the 

no

 form of 

the command.

mpls experimental

 [

other

 | 

range

]

no mpls experimental

 

Syntax Description

mpls experimental Command History

Defaults

Defaults to 

other

, that is, any MPLS EXP levels that are not explicitly configured. 

Configuration Modes

VC-class configuration (for a VC class)

Bundle-vc configuration (for ATM VC bundle members) 

Usage Guidelines for the mpls experimental Command

Assignment of MPLS EXP levels to VC bundle members allows you to create differentiated service 
because you can distribute the MPLS EXP levels over the different VC bundle members. You can map 
a single level or a range of levels to each discrete VC in the bundle, thereby enabling VCs in the bundle 
to carry packets marked with different levels. Alternatively, you can configure a VC with the 

mpls experimental other

 command to indicate that it can carry traffic marked with levels not 

specifically configured for it. Only one VC in the bundle can be configured with the 

mpls experimental 

other

 command to carry all levels not specified. This VC is considered the default VC.

To use this command in vc-class configuration mode, enter the 

vc-class atm

 global configuration 

command before you enter this command. This command has no effect if the VC class that contains the 
command is attached to a standalone VC, that is, if the VC is not a bundle member.

To use this command to configure an individual bundle member in bundle-vc configuration mode, first 
enter the 

bundle

 command to enact bundle configuration mode for the bundle to which you want to add 

or modify the VC member to be configured. Then, use the 

pvc-bundle

 command to specify the VC to 

be created or modified and enter bundle-vc configuration mode.

other

(Optional) Any MPLS EXP levels that are not explicitly configured. 

range

(Optional) A single MPLS EXP level specified as a number from 0 to 7, or 
a range of levels specified as a hyphenated range. 

Cisco IOS Release

Description

Release 12.0(26)S

This command was introduced on the PRE1.

Summary of Contents for 10000 Series























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands