![background image](http://html1.mh-extra.com/html/cis/vcc-g32s21cl/vcc-g32s21cl_product-specification-and-operation-manual_2608684030.webp)
900-525-31-00
30
13. Handling Precautions
【
Important
】
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting
these
precautions.
Do not use
or store
the camera in the following extreme conditions:
Extremely dusty or humid places.
Extremely hot or cold places (operating temperature –5 to +45 )
℃
℃
Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.
Places subject to fluorescent light reflections.
Places subject to unstable (flickering, etc.) lighting conditions.
Places subject to strong vibration.
Remove dust or dirt on the surface of the lens with a blower.
Do not apply excessive force or static electricity that could damage the camera.
Do not shoot direct images that are extremely bright (e.g., light source, sun, etc.), and when camera
is not in use, put the lens cap on.
Follow the instructions in Chapter 6, “External connector pin assignment” for connecting the camera.
Improper connection may cause damages not only to the camera but also to the connected devices.
Confirm the mutual ground potential carefully and then connect the camera to monitors or computers.
AC leaks from the connected devices may cause damages or destroy the camera.
Do not apply excessive voltage.
(Use only the specified voltage.) Unstable or improper power supply
voltage may cause damages or malfunction of the camera.
Make sure that the camera and peripheral equipments are properly connected before turning the camera
on. Especially in INT/EXT sync signal settings, improper connection may cause damages to the camera
and the connected devices.
VCC-G32S21CL can be connected to a capture board for Camera Link by use of dedicated cable.
In case of abnormal operation, contact the distributor from whom you purchased the product.