background image

 

Welcome to Custom Integration Solutions 

 

Thank you for purchasing CIS devices. Our solutions make it easy for integrators to deploy networks in 
home and business settings with minimal configuration. Our support team is here to assist with setting up 
equipment and answering your network related questions. 

 

Overview 

CIS wireless access points provide a compact and powerful solution to your home and commercial 
connectivity needs. CIS Access points are weatherproof and can be fixed to any external wall or ceiling. 
The 360° coverage pattern makes these access points ideal for business and residential applications. Keep 
your cable runs hidden by routing the Ethernet cables through an access slot in the rear of the access 
points. 

 

The CIS-ACWAP provides high speed connectivity on the 2.4 and 5 GHz bands with support for 
wireless standards 802.11 a, b, g, n, and ac. 

 

The CIS-WAP is a low-cost option providing 2.4 GHz connectivity with support for wireless 
802.11b, g, and n. 
 

Package Contents 

 

 

 

 

 

 

       AP           PoE Injector        DC Adapter         Mounting        Ceiling Plate     Screw Kit      Pole mount 
                                                                           Bracket   

 

 

 

(AC-WAP only) 

 

Power 

CIS access points are powered by via the DC Jack or PoE on ETH1. Use the included DC adapter, PoE 
injector, or connect to a router or switch that provides PoE.  

 

The CIS-ACWAP accepts 10-57v via the DC jack or 18-57v via PoE on ETH1. It can accept 802.3af/at 
power and consumes a maximum of 10W. 
 

 

The CIS-WAP accepts 11-57v via the DC jack or PoE. It can accept 802.3af/at power and consumes 
a maximum of 4W. 

 

Summary of Contents for CIS-ACWAP




























Reviews: