CR-SEH
Bridge Commands
Command
Description
help
Displays help screen for command
access <accesscode>
Sets access code to allow slave CR-SEH onto to
Master’s network. Slave accesscode must match
accesscode of desired Master
filter [disable, bcast,
mcast, show]
Selects filtering operation and level.
login [enable|disable]
Enables/disables accesscode/password login
authentication. Must be set in master and slave
master
Sets CR-SEH as Master bridge
password <pwrd>
Sets login password. Slave password must match
password of desired Master CR-SEH
slave
Sets CR-SEH as Slave bridge (default)
bridge
status
(Master only)
Displays status of active connections
access Sets
the
accesscode
portion of the
accesscode/password
pair to allow slave CR-SEHs
to connect to a master CR-SEH.
accesscode
must match the
accesscode
in the master
CR-SEH.
filter
Selects Ethernet traffic filtering mode.
filter disable
turns filtering off.
filter bcast
filters out broadcast and multicast
packet while
filter mcast
filters out just multicast packets.
filter show
displays the
filter settings.
login
Turns the authentication login requirement off and on. When on, Enabled, an accesscode and
password must be entered in the slave CR-SEH that matches the accesscode and password of
the master CR-SEH with which the slave CR-SEH wants to establish a connection. Note that
the network number of the CR-SEHs must also agree. See the section
Radio Commands
for
details on the network number. This feature prevents unauthorized CR-SEHs from
connecting to a CR-SEH network.
master
Sets the CR-SEH as the Master CR-SEH.
password Sets
the
password
portion of the
accesscode/password
pair to allow slave CR-SEHs to
connect to a master CR-SEH. Password must match the password in the master CR-SEH.
slave
Sets the CR-SEH as a Slave CR-SEH.
status
Displays the status of active slave CR-SEH connections. (Only available in the master CR-
SEH.)
2000- 2004 Cirronet
Inc
21
M-2411-0013 Rev A
