Cirris Signature 1000R+, User Manual, Page: 45 / 88

Section 10: Select a Test Procedure / Testing Complex Cables
1000R+ User’s Guide / page 46
selected.
The prompt changes to
Learning Complex
as the analyzer learns the pattern of
wires which have resistances less than the Connection Resistance setting.
The prompt finally changes to
Creating Checks
as the analzyer learns the resistors
and diodes in the cable. The analyzer sets the accuracy of the resistor check to a
default value of 10%. You can change this value using CTL or CTLynx from Cirris
Systems.
Important!
If you change this value, the analyzer’s accuracy (4%) should
always be added to the expected accuracy of the resistance.
How to document a complex assembly
When the analyzer has finished learning a complex assembly, it prompts
SIG:XXXXXX-MULTI Please Verify
. Either press
Display/Print
to print out the
documentation, or transcribe the documentation by hand.
Please see next page...
SIG:XXXXXX-MULTI
PLEASE VERIFY
Press here