GETEST
Page 5 of 24
1.-
SAFETY PRECAUTIONS
Follow the warnings described in this manual with the symbols shown below.
DANGER
Warns of a risk, which could result in personal injury or material damage.
ATTENTION
Indicates that special attention should be paid to a specific point.
If you must handle the unit for its installation, start-up or maintenance, the following should
be taken into consideration:
Incorrect handling or installation of the unit may result in injury to personnel as
well as damage to unit. In particular, handling with voltage applied may result in
electric shock, which may cause death or serious injury to personnel. Defective
installation or maintenance may also lead to the risk of fire.
Carefully read the manual prior to connecting the unit. Follow all the installation
and maintenance instructions for the unit throughout its working life. In particular,
follow the installation standards indicated in the Low Voltage Directive and
additional technical instructions.
The installation, operation and maintenance of LV units must only be carried out by
authorised installers. LV regulations (Art. 22) specifically define the requirements
that authorised installers must meet.
If in order to install the unit, you must work in areas that have high-voltage (HV)
units installed, then the personnel handling units in this area must be authorised to
work in HV installations. See National Electric Code 55/2004 dated 18-06-2004,
which regulates the requirements and the operation of high-voltage installation and
maintenance companies.
2.-
PRODUCT DESCRIPTION
2.1.- DESCRIPTION
Step and contact analyzer based on current injection during one network cycle. Provides up to 50
A to a maximum recommended earthing resistance of 10 ohms. Remote control via telephone and
Bluetooth communication. The unit's software is easily updated and customized.
