7
Instructions Manual
GETEST
The centre of gravity of some device may be at a considerable height.
Therefore, when it is handled by forklifts, it is advisable to hold the
device properly and not make sudden manoeuvres. It is advisable not
to suspend the device at a height greater than 20 cm from the ground.
To unload and move the device, a forklift with shovels must be used, which should cover the entire
depth of the base. Failing that, the blades must be long enough to support at least ¾ parts of that
depth. The forklift blades must be flat and rest firmly on the base. The device must be raised supporting
the blades below the profile that supports the device (
).
Figure 2: Unloading with a forklift�
1�3�- STORAGE
For the storage of the device, the following recommendations must be adhered to:
Avoid placing it on uneven surfaces.
Do not place it in outdoor or damp areas, or those exposed to water projection.
Avoid heat sources (maximum ambient temperature: 45 ºC).
Avoid saline and corrosive environments.
Avoid placing the device in areas where there is a lot of dust or contamination by chemical
agents or other types of pollution.
