11
Instructions Manual
GETEST
3�3�-
GTEST Probe: MEASUREMENT ELECTRODE
The
GTEST Probe
measurement electrode is an accessory that simplifies feed-through and contact
voltage measurements by replacing the 25 kg weights. The measurement electrodes allow a person to
use their weight to make the measurement.
Because the
GETEST
device can generate up to 600 V~, the measurement electrode is properly
insulated.
The
GTEST Probe
measurement electrode is an accessory whose sole use is to take
step and contact measurements with the
GETEST
device.
Read all warnings carefully before handling and using the electrodes.
For use by authorised or specialised personnel only.
Inspect the electrodes before each measurement and do not use them if the insulation
material is damaged or broken.
They should only be used in dry environmental conditions. Never use them in the rain.
Keep the electrode surface clean using a soft cloth and soapy water. Keep the electrode
dry at all times. Never use abrasive cleaning elements.
Do not subject the electrodes to blows or allow them to come into contact with sharp
objects that may degrade the insulation.
Store the electrodes in a dry place sheltered from rain, prolonged exposure to sunlight
or other agents that can degrade the insulation.
