When the high-voltage option is selected, the device will have some of its functions disabled. The
disabled functions are:
The Plug&Play process cannot be carried out.
The AutoTest process cannot be carried out.
The leakage current is not measured and the related alarms cannot be enabled.
Press the
key to enter edit mode. It is identified by the
symbol and the flashing of the
digits to be modified.
The
key shows the next option.
The
key shows the previous option.
Press
to validate the data; the
symbol disappears from the display.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the device switches to the simulation screen,
“
.
5�11�- EXPERT SETUP
In this point it is possible to decide whether to access the expert setup menu.
If the
YES
option is selected, the next programming step will be the voltage transformation ratio
(
“5.12.- VOLTAGE TRANSFORMATION RATIO”
)
When the
No
option is selected, the display returns to the Plug&Play configuration screen (
)
Press the
key to enter edit mode. It is identified by the
symbol and the flashing of the
digits to be modified.
The
key shows the next option.
The
key shows the previous option.
Press
to validate the data; the
symbol disappears from the display.
85
Instruction Manual
Computer SMART III
Summary of Contents for Computer SMART III 12
