4.4.- DISPLAY MODES:
The
CEM-C20
has 2 display modes:
Display in standby mode
Display in reading mode
4�4�1� DISPLAY IN STANDBY MODE
With the display in standby mode, all of the information is presented in cyclic form without any
need to perform any action on the
CEM-C20
buttons.
7 different parameters are displayed in this mode, see
, in which they alternate every 6
seconds.
The unit is in this mode by default when none of the buttons are pressed.
Short press the
button to stop the cyclic movement of the parameter being shown at the
time.
From then on, short press the
button to browse all the parameters defined in
.
Table 5: Standby mode displays
Screen
Parameters
Total imported active energy
Total exported active energy
Only displayed in the 4-quadrant version.
Reactive energy quadrant L+ total
(1)
Reactive energy quadrant L- total
(1)
Only displayed in the 4-quadrant version.
Reactive energy quadrant C- total
(1)
Only displayed in the 4-quadrant version.
14
CEM-C20
Instruction Manual
