Circontrol Wallbox eNext S, Installation Manual

Page: 23 / 32

19
Home BeON
MCB MCB
Other
consumption
devices
Home BeON
MCCB
F
Home BeON is an optional device that optimises the Electric Vehicle (EV) Charge Point. Analysing
the total current consumption in residential facilities, Home BeON manages the remaining
current for the EV Charge Point, avoiding any tripping on the Main Circuit.
BeON is connected downstream of the main power switch and upstream of the main loads.
For further information, please refer to the eNext Instruction Manual and Home BeON manual.
BOR1 BOR4
A(-)
B(+)
SNAP FERRITE
(-)
(+)
2S2
2S1
1S2
1S1
Signal cable has to do two
loops into the snap ferrite.
Home BeON is only available on single-phase Charge Points.