CipherLab 9500PPC, Reference Manual

Page: 93 / 103

83
The tables below list reader settings as well as symbology settings for the Long Range Laser (LR) or
Extra Long Range Laser (ELR) scan engine.
READER SETTINGS TABLE
LR/ELR DESCRIPTION DEFAULT
Decode Time-out Set the maximum time for decoding to continue during a
scan attempt.
1~9 (second) for ReaderCfg.exe – default to 3
5~99 (0.1 second) for programming – default to 30
3 sec.
AIM Pattern Decide whether to have the aiming dot.
When you press the [SCAN] button, the scan engine
will emit a red dot for aiming. It will stay on until you
press the [SCAN] button again to emit a scan beam.
Off
Read Redundancy Level 1
Level 1 The following barcodes must be successfully read twice before being
decoded:
BARCODE TYPES CODE LENGTH
Codabar All
MSI 4 characters of less
Discrete 25 (=Industrial 25) 8 characters of less
Interleaved 25 8 characters of less
Level 2 All barcodes must be successfully read twice before being decoded.
Level 3 All barcodes except for the following barcodes must be successfully read
twice before being decoded. The following barcodes must be read three
times:
BARCODE TYPES “EXCLUDED” CODE LENGTH
MSI 4 characters of less
Discrete 25 (=Industrial 25) 8 characters of less
Interleaved 25 8 characters of less
Level 4 All barcodes must be successfully read three times before being decoded.
Appendix III
LR/ELR LASER SCAN ENGINE