CipherLab 9500PPC, Reference Manual

Page: 13 / 103

3
Introduction
INSTALLING THE HAND STRAP
The hand strap is ideal for one-handed operation, which requires safe and convenient hold of the
mobile computer. Always make sure the hand strap is well hooked and screwed to the back of the
mobile computer. When the hand strap is desired, install it to the mobile computer by following
these steps:
1) Place the mobile computer face down on a flat and clean surface.
2) Screw one end of the hand strap to the shield-like cover on the back of the mobile computer.
3) Insert and hook the other end of the hand strap to the bottom of the mobile computer.
4) Make sure the hand strap is securely attached to the mobile computer.
5) Adjust the length of the hand strap to suit your handbreadth.
Figure 2: Installing the
Hand Strap