CipherLab 9500PPC, Reference Manual

Page: 22 / 103

12
9500PPC Mobile Computer Reference Manual
1.2.3 INSERTING THE SD OR CF CARD
When you need to expand memory or add a peripheral, take the following steps to install the CF or
SD card to the mobile computer:
Warning: If not factory-installed, the Ingress Protection rating of enclosures may not be the
same as claimed.
1) Press the [Power] key to turn off the mobile computer.
2) Remove the top enclosure of the mobile computer by unscrewing the four screws.
3) Insert your card properly.
4) Replace the top enclosure and tighten the screws.
Warning: Make sure the mobile computer is set to Suspend mode; otherwise, it may cause
damage to the mobile computer.
Figure 6: Inserting the SD
or CF Card