Cincoze CV-100-P2100 Series User Manual Download Page 93

Page: 93 / 111

100

P2100 Series | User Manual

4.7 Save & Exit

4.7.1 Save Changes and Exit

This item allows you to exit system setup after saving changes.

4.7.2 Discard Changes and Exit

This item allows you to exit system setup without saving changes.

4.7.3 Save Changes and Reset

This item allows you to reset the system after saving changes.

4.7.4 Discard Changes and Reset

This item allows you to reset system setup without saving any changes.

4.7.5 Save Changes

This item allows you to save changes done so far to any of the setup options.

4.7.6 Discard Changes

This item allows you to discard changes done so far to any of the setup options.

4.7.7 Restore Defaults

This item allows you to restore/ load default values for all the options.

4.7.8 Save as User Defaults

This item allows you to save the changes done so far as user defaults.

4.7.9 Restore User Defaults

This item allows you to restore the user defaults to all the options.

Summary of Contents for CV-100-P2100 Series
















































































































Search results

Summary of Contents for CV-100-P2100 Series

Reviews:

Related manuals for CV-100-P2100 Series

Brands by name

Popular brands

Cincoze CV-100-P2100 Series, User Manual

Search results

Summary of Contents for CV-100-P2100 Series

Reviews:

Related manuals for CV-100-P2100 Series

Brands by name

Popular brands