Cincoze CV-100-P2100 Series User Manual Download Page 37

Page: 37 / 111

100

P2100 Series | User Manual

1.5.2 Rear

DC IN

Used to plug a DC power input with terminal

block

VGA

Used to connect to a monitor with analog signal

interface

LAN

Used to connect to local area network

USB3.2 Gen2

Used to connect to USB 3.2 Gen2/3.2

Gen1/2.0/1.1 compatible devices

Display Port

Used to connect a monitor with DisplayPort

interface

Digital I/O Terminal Block

The Digital I/O terminal block supports 16

isolated DIO (8 digital input and 8 digital output)

Remote Power On/Off Terminal Block

Used to connect to remote power on/off switch

Universal I/O Bracket (For P2102E)

Used to expand I/O for Mini-PCIe module or

PCI(e) card

CV-100/P2102

CV-100/P2102E

1.5.3 Left

Antenna Hole

Used to connect an antenna for optional wireless

module

USB 2.0

Used to connect to USB 2.0/1.1 compatible

devices

COM Port

Used to connect to RS-232/422/485 serial

devices

CV-100/P2102

CV-100/P2102E

Summary of Contents for CV-100-P2100 Series
















































































































Search results

Summary of Contents for CV-100-P2100 Series

Reviews:

Related manuals for CV-100-P2100 Series

Brands by name

Popular brands

Cincoze CV-100-P2100 Series, User Manual

Search results

Summary of Contents for CV-100-P2100 Series

Reviews:

Related manuals for CV-100-P2100 Series

Brands by name

Popular brands